• +44 (0)1793 784389

Download PLECS

Download the PLECS Blockset Package

If you would like to use PLECS with MATLAB/Simulink then download PLECS Blockset. However, if you would like to use PLECS as a standalone solution then download PLECS Standalone.

Running PLECS Blockset requires MATLAB and Simulink on your system. The table below shows the platforms and MATLAB versions currently supported by PLECS Blockset. Download the appropriate file and follow the installation instructions. If you are unsure whether you need the 32-bit or 64-bit package for your operating system, enter the command mexext in MATLAB.

The packages include all files for the following PLECS products; your license file determines which products will be enabled:

  • PLECS Blockset
  • PLECS Blockset Viewer
  • PLECS Coder
  • PLECS PIL

N.B. PLECS Blockset does not support Hardware in the loop (HIL) modelling. This requires PLECS Standalone and an RT Box.

Platform MATLAB version File
Windows 32-bit 7.4 .. 9.1 plecs-blockset-4-0-7_win32.exe
Windows 64-bit 7.4 .. 9.1 plecs-blockset-4-0-7_win64.exe
Mac / Intel 32-bit 7.4 .. 7.10 plecs-blockset-4-0-7_maci.tar.gz
Mac / Intel 64-bit 7.9 .. 9.1 plecs-blockset-4-0-7_maci64.tar.gz
Linux / Intel 64-bit 7.4 .. 9.1 plecs-blockset-4-0-7_linux64.tar.gz
plecs_power_supply

Download PLECS Standalone

The table shows the platforms currently supported by PLECS Standalone. Download the appropriate package file and follow the install instructions. The packages include all files for the following PLECS products; your license file determines which products will be enabled:

  • PLECS Standalone
  • PLECS Coder
  • PLECS Processor in the loop (PIL)
  • PLECS Hardware in the loop (HIL)*

*HIL requires an RT Box.

ev_schematic

Download PLECS RT Box Software

To operate the RT Box, PLECS Standalone and the PLECS Coder are required on a host computer. In addition, a target support package (see table) must be installed on the host. Please download the appropriate ZIP archive, extract it and move the folder PLECS_RT_Box, for example to HOME/Documents/PLECS/CoderTargets. In PLECS, choose the entry preferences… from the FILE menu (PLECS menu on Mac OS X) to open the PLECS preferences dialog.¬†On the CODER tab click on the CHANGE button and select the folder HOME/Documents/PLECS/CoderTargets. The RT Box Target should now be listed under installed targets.

Platform File
Windows 32-bit/64-bit PLECS_RT_Box_1.2.1_win.zip
Mac / Intel 64-bit PLECS_RT_Box_1.2.1_mac.zip
Linux / Intel 64-bit PLECS_RT_Box_1.2.1_linux.zip

More Information?

Telephone +44 (0)1793 784389 or email: sales@ppm.co.uk