The Z+ range of high voltage programmable power supplies available from PPM Power now includes higher power units and a higher range of voltages. The 200W and 400W units are now available with output voltages of up to 160, 320 and 650V DC – extending the range well above the previous 100V DC limit.
In addition, 600W and 800W units have now been launched. These new products share the same features and compact dimensions as the other Z+ power supplies and achieve efficiencies of up to 89%.
The Z+ range is now better suited for use in higher voltage applications such as deposition processes, ROVs and ATE systems as well as general laboratory and industrial use. The units can operate in either constant current or constant voltage modes and accept a universal (85-265Vac) input. Higher power systems can be achieved by connecting up to 6 units in parallel in master-slave configuration. All models can be programmed via the front panel or remotely by using the built-in USB, RS232/RS485 or analogue control interfaces.
View product series
Three new models are now available, from PPM Power, in the 15kW series Genesys 3U programmable power supplies. These new models have outputs of 30V at 500A, 40V at 375A and 50V at 300A. Higher currents are particularly suitable for OEM, industrial, aerospace and ATE markets. Each unit can operate in constant current or constant voltage modes and accept three phase 400VAC or 480VAC inputs.
Higher power systems can be configured using the master/slave “advanced” parallel operating mode which configures the master unit to be the single point for programming, measurement and status of the total system. Four units can then operate as a single 60kW power supply. All Genesys power supplies feature an embedded 16-bit RS-232/RS-485 multi-drop digital interface which allows up to 31 power supplies to be controlled in a daisy chain.
View product series
PLECS workshop on 11th & 12th November 2015 at the University of Manchester
You will be guided through the exercises from basic applications using PLECS software to more advanced aspects like code generation and integration, scripting, PIL and much more.
PPM Power are pleased to announce a new high voltage connector, MCS Series, to add to their existing high quality range of HV connectors, manufactured in Germany by GES.
New type of connection for the high voltage differential probe series HVD3000 is now available.
EBG are expanding their production facility in Austria, just 5 kilometres from their head office. The new production hall will be 1200m2 and house their screen-printing area and should be completed towards the end of 2015.
The WaverSurfer 3000 series oscilloscope now features the trigger and decode option ‘AUTO’.
Talk to our technical team about your custom requirements.
PPM Power can help you with your custom high voltage and pulsed power applications.
9th & 10th September 2015 at Millbrook Proving Ground
PPM Power will once again be exhibiting at this event.
Our technical team can help with your application, including power supplies for commercial vehicle fast charging systems and bi-directional battery simulation for test benches. This capability extends to 600kW for battery chargers and 250kW for bi-directional battery simulators.
PPM Power along with our partners, such as TDK Lambda, Heinzinger, Schaefer, ABB, EBG, DAU, LEM and PLEXIM, will work with you on your application requirements.
Come and discuss our full range of products including: