• +44 (0)1793 784389

Z+ Series

Ultra-compact benchtop programmable DC power supply

The Z+ series is an ultra-compact bench top programmable DC power supply available from 200W to 800W. Voltage outputs range from from 10V to 650V. The units are designed for benchtop operation, however, up to six units can also be mounted in dedicated 19-inch rack. Features include stored voltage/current waveforms and USB interface. Control is possible by external voltage or external current.

  • Built-in USB, RS-232, and RS485 interface
  • LAN, GPIB, and isolated analog interfaces (optional)
  • UL610101-1, EN61010-1 approved.
  • Support for master-slave parallel operation (up to 6 units)
  • Support for in-series operation (up to 2 units)
  • Warranty period of 5 years.

Unique arbitrary waveform generation capabilities

The Z+ can create and store up to four application specific test waveforms, removing the need for an external controller in basic simulation tasks. Up to 12 values can be programmed using the waveform creator software provided and four waveforms can be stored in the Z+ unit’s memory.

Complex waveforms can be created using LabView® (repetitive or single-shot) and injected into the system under test and the results analysed to monitor operation or pinpoint a fault. Stored programmes can be run remotely or recalled and run directly using the Z+ front panel controls without the need for a PC (if preferred).

TDK-Lambda Z+ series benchtop programmable power supplyTypical Applications

A typical test environment would be to simulate the characteristics of another power source, for example to simulate car battery voltage transients according to DIN 40839 for testing automotive electronics or simulating the output profile of a solar cell array.
The Z+ has a fast command processing time and output sequencing. Uniquely, it has two programmable output pins that can be used, for example, to control isolation or polarity reversal relays, without the need of a separate PLC.

These power supplies are suitable for a wide range of ATE and OEM applications such as semiconductor burn-in, laser diodes and heater supplies. Browse the table below or call us on +44 (0)1793 784389 and talk to one of our technical sales team.

The table below is sortable.  Click on a column heading to sort.  

Z+ Series

Part NumberMaximum Voltage (V)Maximum Current (A)Maximum Power (W)Efficiency (%) Overvoltage Shutdown (V)Remote Sense Compensation (V)
Z10-20102020080/820.5 - 121
Z10-40104040080/820.5 - 121
Z10-60106060080/820.5 - 121
Z10-72107272080/820.5 - 121
Z20-10201020082/841 - 241
Z20-20202040081/831 - 241
Z20-30203060082/841 - 241
Z20-40204080082/841 - 241
Z36-636621683/852 - 402
Z36-12361243283/852 - 402
Z36-18361864884/852 - 402
Z36-24362486484/852 - 402
Z60-3.5603.521083/855 - 663
Z60-760742083/855 - 663
Z60-10601060083/855 - 663
Z60-14601484083/855 - 663
Z100-2100220083/855 - 1105
Z100-4100440084/865 - 1105
Z100-6100660084/865 - 1105
Z-100-8100880084/865 - 1105
Z160-1.31601.320879/815 - 1765
Z160-2.61602.641684/865 - 1765
Z160-4160464086.5/88.55 - 1765
Z160-5160580086.5/88.55 - 1765
Z320-0.653200.6520879/815 - 3535
Z320-1.33201.341684/865 - 3535
Z320-2320264087/88.55 - 3535
Z320-2.53202.580086.5/895 - 3535
Z375-2.23752.282587.5/89.55 - 3535
Z650-0.326500.3220879/815 - 7175
Z650-0.646500.6441684/865 - 7175
Z650-1650165086.5/88.55 - 7175
Z650-1.256501.2581287/895 - 7175

Useful Documents

pdf-icon

Low Voltage Datasheet

pdf-icon

High Voltage Datasheet

pdf-icon

Low Voltage User Manual

pdf-icon

High Voltage User Manual

pdf-icon

Z+ LAN User Manual

pdf-icon

Z+ IEEE User Manual

 

 

 

You may also like…

Capacitors

custom DC link capacitor and busbarCustom Capacitor Solutions

power ring homepage buttonPower Ring

APCS standard test kitStandard Test Kits

Ceramic Capacitors

Recent News

More Information?

Telephone +44 (0)1793 784389 or email: sales@ppm.co.uk