The Genesys+™ series of programmable DC power supplies uses Digital Signal Processing (DSP) technology to improve performance, functionality and efficiency up to 93%. Genesys programmable power supplies are used in applications such as component, aerospace and automotive testing, semiconductor fabrication, water treatment, plating and solar array simulation.

• Constant current, constant voltage or constant power modes
• Internal resistance simulation
• 10 kW in a 2U high package and 15 kW in 3U
• Output voltages and currents of up to 0‑10 V/1,500 A to 0-600 V/25.5 A

Improvements over standard Genesys range

• Two user-programmable output control pins can activate external devices, such as load disconnect relays.
• Arbitrary waveform profiles (e.g. car battery simulation at vehicle start) of up to 100 steps.
• Advanced parallel master/slave system allows a multi PSU system to achieve dynamic response, ripple and noise performance comparable to a single power supply.
• Up to four units can be connected in parallel using a data link cable. The master and slave units automatically detect the parallel data connection and set their parameters accordingly.
• Faster up and down programming response times speed up operation with user adjustable voltage and current slew rate control.

Model	Output Voltage DC	Output Current	Output Power	Height (mm)
GSP10-1000	10V	1000A	10000W	2U
GSP10-1500	10V	1500A	15000W	3U
GSP20-500	20V	500A	10000W	2U
GSP20-750	20V	750A	15000W	3U
GSP30-340	30V	340A	10200W	2U
GSP30-510	80V	510A	15300W	3U
GSP40-250	40V	250A	10000W	2U
GSP40-375	40V	375A	15000W	3U
GSP50-200	50V	200A	10000W	2U
GSP50-300	50V	300A	15000W	3U
GSP60-170	60V	170A	10200W	2U
GSP60-255	60V	255A	15000W	3U
GSP80-130	80V	130A	10400W	2U
GSP80-195	80V	195A	15600W	3U
GSP100-100	100V	100A	10000W	2U
GSP100-150	100V	150A	15000W	3U
GSP150-68	150V	68A	10200W	2U
GSP150-102	150V	102A	15300W	3U
GSP200-50	200V	50A	10000W	2U
GSP200-75	200V	75A	15000W	3U
GSP300-34	300V	34A	10200W	2U
GSP300-51	300V	51A	15300W	3U
GSP400-26	400V	26A	10400W	2U
GSP400-39	400V	39A	15600W	3U
GSP500-20	500V	20A	10000W	2U
GSP500-30	500V	30A	15000W	3U
GSP600-17	600V	17A	10200W	2U
GSP600-25.5	600V	25.5A	15300W	3U

GSP Low Profile

Part Number	Output Voltage DC	Output Current	Output Power	Height
GSPL20-750	20V	750A	15kW	2U Rack
GSPL20-1125	20V	1125A	22.5kW	3U Rack
GSPL30-500	30V	500A	15kW	2U Rack
GSPL30-750	30V	750A	22.5kW	3U Rack
GSPL40-376	40V	376A	15.04kW	2U Rack
GSPL40-564	40V	564A	22.56kW	3U Rack
GSPL60-250	60V	250A	15kW	2U Rack
GSPL60-375	60V	375A	22.5kW	3U Rack
GSPL80-188	80V	188A	15.04kW	2U Rack
GSPL80-282	80V	282A	22.56kW	3U Rack
GSPL100-150	100V	150A	15kW	2U Rack
GSPL100-225	100V	225A	22.5kW	3U Rack
GSPL150-100	150V	100A	15kW	2U Rack
GSPL150-150	150V	150A	22.5kW	3U Rack
GSPL200-75	200V	75A	15kW	2U Rack
GSPL200-112.5	200V	112.5A	22.5kW	3U Rack
GSPL300-50	300V	50A	15kW	2U Rack
GSPL300-75	300V	75A	22.5kW	3U Rack
GSPL600-25	600V	25A	15kW	2U Rack
GSPL1000-15	1000V	15A	15kW	2U Rack
GSPL1000-22.5	1000V	22.5A	22.5kW	3U Rack
GSPL1500-10	1500V	10A	15kW	2U Rack
GSPL1500-15	1500V	15A	22.5kW	3U Rack

Compatible with existing models

The new Plus series is compatible with standard Genesys™ and Z+ models, using the same communication protocols and signals. All functions can be programmed via the front panel or remotely using the LAN (LXI 1.5), USB 2.0 or RS232/485 communications interfaces. An isolated analogue control and monitoring interface (0-5 or 0-10 V) is also provided. GPIB (IEEE488) is available as an option.

Interface options

The Anybus CompactCom platform enables various interface options as they are introduced e.g. Devicenet, Ethercat, Modbus and Profibus. A full package of software drivers, waveform creator and virtual front panel GUI is provided.

Safety features

• Safe Start – the power supply will return to its last operational settings after a power interruption but with the output disabled.
• Auto Re-Start – the power supply returns to the last used operation settings after a power interruption.
• Last Setting Memory – retains settings such as the output voltage/current, output on/off, OVP/UVL level, Fold-Back and Start-Up mode at each AC input turn-off sequence.
• Built-in protective functions – include over voltage protection (OVP), under voltage limit (UVL), fold-back protection (FOLD) and over-temperature (OTP) protection.

Certifications

Safety certifications include IEC/EN/UL 60950-1 with CE marking for the EMC, LV (low voltage) and RoHS Directives. The series conforms to the industrial environment IEC/EN61326-1 standard for conducted EMI, radiated EMI and EMC immunity.

Application Notes

Description	PDF
What is isolated analogue control and how does it benefit us?	Download
What is a power supply slew rate and can it be programmed?	Download
How to use the GENESYS+ programmable signals	Download
How to simulate a battery’s internal resistance using the GENESYS+	Download
How to generate arbitrary waveforms	Download
How does the trigger function work on the GENESYS+	Download

Useful Documents