The 203 series of TDK ALE capacitor chargers are suitable for high power applications.
This range can provide up to 25kJ/s of peak charging power with an excellent pulse to pulse repeatability and passive PFC as standard.
Browse the table below or call us on 01793 784389 and talk to one of our technical sales team.
Part Number Max. Power (kW) Max. Voltage (kV) Peak Capacitor Charging Power (J/s) HV Insulation Weight (kg) 203-1kV 30 1 25000 Oil 100 203-2kV 30 2 25000 Oil 100 203-4kV 30 4 25000 Oil 100 203-5kV 30 5 25000 Oil 100 203-10kV 30 10 25000 Oil 100 203-15kV 30 15 25000 Oil 100 203-20kV 30 20 25000 Oil 100 203-30kV 30 30 25000 Oil 100 203-40kV 30 40 25000 Oil 100 203-50kV 30 50 25000 Oil 100
Input voltage & frequency
208, 400 or 480 VAC three-phase
Voltage & Current Programming
Via 15-pin D-sub connector on rear of unit
Signals include: Vprogram (0-10V), HV Enable/Reset
Inhibit, Summary Fault, Load Fault, Vanalog, Vpeak
Available as fixed positive or negative
Flowed water at 7.6 L/min
Max. inlet temperature 35 Deg.C
All water paths are at ground potential
Constructed from Copper, brass or Buna-N hose.Operating Temperature
0 to +55 Deg.C
100ppm per Deg.C typical
+/- 0.2% per hour (after 1 hour warmup)
Pulse to Pulse Repeatability
+/- 2% to 100Hz (higher rep rates possible)Dimensions
483 W x 311 H x 571 D mm
Front Panel Options
L - Voltage control, voltage & current meters and status indicators
S - On/off switch, status indicators
OEM - Blank front panel
EN - Low Enable. Replaces standard high enable
5V - 0-5V Analog Programming. Replaces standard 0-10V programming
LP - Latching Overload Protection, requires HV reset after fault.
DC - Continuous DC operation
CP - 10-turn current programming pot and/or 0-10V remote input (DC only)
RS - Remote load voltage sense replaces local sense